Alpine IR Long Control Arm & Bracket Kit – 8-Arm (3-6” Lift), JK (1315011)

Product Description

Fits:

Jeep Wrangler JK (2007-2018) Use with 3-6" Lifts

TeraFlex JK: Alpine IR Long Control Arms & Alpine Long Arm Brackets provide complete alignment adjustability for maximum performance on JK Wrangler/Unlimited models with 3-6” lifts. Can be added to an existing suspension lift.

Our innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping. These maintenance-free bushings improve on- and off-road ride quality and performance.

On higher lifts, Alpine Long Arm Brackets reposition the frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during droop and shock load transferred through the control arms.

These CAD-designed TeraFlex JK: Alpine Long Arm Brackets are engineered for maximum strength. By streamlining the frame-end mounting points, we were able to incorporate both upper and lower mounts in each bracket thus simplifying installation while maintaining a factory appearance.

Includes:

Alpine IR Long Control Arm Kit – 8-Arm (# 1415612):
• Front Upper (# 1315570) – pair
• Front Lower (# 1315580) – pair
• Rear Upper (# 1315590) – pair
• Rear Lower (# 1315600) – pair

Alpine Long Arm Bracket Kit (# 1957000):
• Front Brackets – pair
• Rear Brackets – pair
• Rear Gussets – pair
• All necessary hardware

Features & Benefits:

JK Alpine IR Long Control Arms:

• Adjustable Alpine IR Long Control Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6” lift kits
• Alpine IR Long Control Arms are constructed from durable 42mm x 4mm (upper) or 50mm x 5mm (lower) wall DOM tube for maximum strength
• On higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during droop and shock load transferred through the Alpine IR Long Control Arms
• Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength w/ reduce NVH compared to other long arm kits

JK Alpine IR [Long] Control Arms:

• Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase
• Full range of movement will not restrict articulation or flex off-road
• Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping
• Maintenance-free IR Bushings improve on- and off-road ride quality and performance
• Zero maintenance forged threaded joints for smooth quiet flex
• Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance
• Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment
• TeraFlex Lifetime Warranty against defects

Control Arm Specs:

JK: Alpine IR Long Control Arm Kit – Front Upper (# 1315570):

• Tube Diameter & Wall: 1-5/8” X 0.157” (42mm X 4mm)
• Factory Length = 18-3/4”
• Min. Length = 27-3/8”
• Max. Length = 28-7/8”
• Axle End = 7/16” (12mm) Bolt
• Frame End = 9/16” (14mm) Bolt
• Thread = 1-1/4”-12 UNF

JK: Alpine IR Long Control Arm Kit – Front Lower (# 1315580):

• Tube Diameter & Wall = 2” X 0.197” (50mm X 5mm)
• Factory Length = 22-5/8”
• Min. Length = 33-3/4”
• Max. Length = 35-1/4”
• Both Ends = 9/16” (14mm) Bolt
• Thread = 1-1/4”-12 UNF

JK: Alpine IR Long Control Arm Kit – Rear Upper (# 1315590):

• Tube Diameter & Wall: 1-5/8” X 0.157” (42mm X 4mm)
• Factory Length = 17-7/16”
• Min. Length = 20”
• Max. Length = 21-1/2”
• Both Ends = 9/16” (14mm) Bolt
• Thread = 1-1/4”-12 UNF

JK: Alpine IR Long Control Arm Kit – Rear Lower (# 1315600):

• Tube Diameter & Wall = 2” X 0.197” (50mm X 5mm)
• Factory Length = 19-3/4”
• Min. Length = 35-3/4”
• Max. Length = 37-1/4”
• Both Ends = 9/16” (14mm) Bolt
• Thread = 1-1/4”-12 UNF

Note(s):

• Requires cutting and welding.
• Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets.

Product Information

Click on a link below to view additional information about this product.

• Install Instructions

Manufacturer - TeraFlex

TeraFlex is a manufacturer of premium suspension systems, body armor, low-range gearing and high-performance axles for the Jeep Wrangler. TeraFlex have been professionally involved with Jeeps since the 1950s, and their experience allows them to make Jeeps perform their best. Since the beginning, a constant flow of new, unique and innovative products has made our line what it is today. TeraFlex was started in the fall of 1996 to meet the needs of a growing market for heavy duty off-road equipment and suspension enhancements. Since that time TeraFlex has maintained a dominant hold on the Jeep market.

Customers also viewed

Complete 8 Adjustable Alpine IR Control Arm Kit – 8-Arm (2-4” Lift), JK

£2,341.63inc VAT £1,951.36ex VAT

Complete 8 Adjustable Alpine IR Control Arm Kit – (0-4.5” Lift), JL

£2,341.63inc VAT £1,951.36ex VAT

Alpine IR Control Arm Kit – Front Lower Adjustable (0-4.5” Lift), JL / JT

£610.81inc VAT £509.01ex VAT

Complete 8 Adjustable Alpine Flexarm Kit, JL

£1,764.70inc VAT £1,470.58ex VAT

JT: 2.5” Alpine CT2 Suspension System

£2,908.93inc VAT £2,424.11ex VAT

JT: 3.5" Coil Spring Base Lift Kit

£840.37inc VAT £700.31ex VAT

2.5” Performance Spacer Lift & Level Kit, JL 2 Door

£610.81inc VAT £509.01ex VAT

2.5” Performance Spacer Lift & Level Kit, JL 4 Door

£610.81inc VAT £509.01ex VAT

3.5" Alpine CT3 Suspension System, JL 4dr: – No Shocks

£3,332.40inc VAT £2,777.00ex VAT

JT: 2.5" Performance Spacer Lift Kit

£420.13inc VAT £350.11ex VAT

HD Forged Adjustable Track Bar – Front, JK LHD

£364.95inc VAT £304.12ex VAT

2.5” Lift Kit, Base 9550 VSS, JL 4 Door

£1,357.43inc VAT £1,131.19ex VAT