JT: 2.5” Alpine CT2 Suspension System (2022000)

Product Description

Fits:

Jeep Gladiator JT (2019+)

Shocks not included and sold separately. We recommend Falcon SP2 2.1 Monotube Shocks PN: 14-02-21-400-200

TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street & Trail) Suspension Systems.

The 2.5” Alpine CT2 Short Arm Suspension System was designed for the enthusiast who wants to fine tune their suspension. Alpine Short Control Arms allow tuning of the caster and pinon angles, centering of the axles in the wheel wells, and wheelbase adjustment. The zero-maintenance adjustable control arms make the Alpine CT2 the perfect all-around suspension system.

Our long and short adjustable Alpine Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tire position. The adjustable Alpine IR Front Track Bar and Front Track Bar Bracket (3.5”+) improve steering response, center the axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling.

This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and 
harshness (NVH).

Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort!

We recommend Falcon Performance SP2 Mode Adjust Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. 

Max Tire Diameter: 

• Sport/Overland Fenders: 35” Tires 
• Rubicon Fenders: 35” Tires

Includes:

• 2.5” Lift Front Coil Springs 
• 0.5” Lift Rear Coil Spring Spacers 
• 8-Arm Alpine Short Control Arm Kit (# 1417550) 
• Alpine IR Front Track Bar (# 1753420) 
• “Foam” Progressive Bump Stop Kit – All 4 (# 1969200) 
• 2” front lower bump stop strike pad extensions – 2 
• 0.5” rear lower bump stop strike pad extensions – 4 
• Front Sway Bar Quick Disconnect Kit (# 1764000) 
• 13” Rear Sway Bar Link Kit 
• Front Brake Line Anchor Kit (# 1101255) 
• All necessary hardware 
• And more

CT Short Arm Suspension Systems:

• Adjustable Alpine Short Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4.5” lift kits 
• Alpine Short Control Arms are constructed from durable 42mm x 4mm wall DOM tube for maximum strength 
• Bolts to the factory control arm mounting brackets

Cross-Trail:

• Delivers true Cross-Trail (CT) performance 
• Dependable performance w/ zero worries 
• Positive, responsive handling w/ reduced NVH 
• High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH damping and ride quality. 
• Adjustable Alpine IR Front Track Bar and Front Track Bar Bracket (3.5”+) improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling 
• Front and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement 
• Full range of movement for off-road flex and articulation 
• Install and drive simple bolt-on installation – no welding required 
• TeraFlex Limited Lifetime Warranty against defects

Note(s): 

• Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels – NOT INCLUDED. 
• Models w/ plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires. 
• All OEM fenders require 2” front and 1” rear bump stop extensions in order to fit 35” tires – INCLUDED. 
• Alignment required. 
• Requires longer shocks (not included in base kit) – we recommend Falcon Performance SP2 Mode Adjust Shocks. 14-02-21-400-200

Product Information

Click on a link below to view additional information about this product.

• Install Instructions - Springs
• Install Instructions - Control Arms

Manufacturer - TeraFlex

TeraFlex is a manufacturer of premium suspension systems, body armor, low-range gearing and high-performance axles for the Jeep Wrangler. TeraFlex have been professionally involved with Jeeps since the 1950s, and their experience allows them to make Jeeps perform their best. Since the beginning, a constant flow of new, unique and innovative products has made our line what it is today. TeraFlex was started in the fall of 1996 to meet the needs of a growing market for heavy duty off-road equipment and suspension enhancements. Since that time TeraFlex has maintained a dominant hold on the Jeep market.

Customers also viewed

3.5" Alpine CT3 Suspension System, JL 4dr: – No Shocks

£3,332.40inc VAT £2,777.00ex VAT

Complete 8 Adjustable Alpine IR Control Arm Kit – 8-Arm (2-4” Lift), JK

£2,341.63inc VAT £1,951.36ex VAT

Alpine IR Long Control Arm & Bracket Kit – 8-Arm (3-6” Lift), JK

£3,665.18inc VAT £3,054.32ex VAT

2.5” Performance Spacer Lift & Level Kit, JL 2 Door

£610.81inc VAT £509.01ex VAT

Complete 8 Adjustable Alpine Flexarm Kit, JL

£1,764.70inc VAT £1,470.58ex VAT

Alpine IR Control Arm Kit – Front Lower Adjustable (0-4.5” Lift), JL / JT

£610.81inc VAT £509.01ex VAT

HD Forged Adjustable Track Bar – Front, JK LHD

£364.95inc VAT £304.12ex VAT

Complete 8 Adjustable Alpine IR Control Arm Kit – (0-4.5” Lift), JL

£2,341.63inc VAT £1,951.36ex VAT

JT: 3.5" Coil Spring Base Lift Kit

£840.37inc VAT £700.31ex VAT

2.5” Performance Spacer Lift & Level Kit, JL 4 Door

£610.81inc VAT £509.01ex VAT

JT: 2.5" Performance Spacer Lift Kit

£420.13inc VAT £350.11ex VAT

JT: 2.5” Sport ST2 Spring & Spacer Lift System & Falcon SP2 2.1 Monotube

£1,939.23inc VAT £1,616.02ex VAT