HD Ball Joints w/out Knurl, JK (3442002)

Product Description

Fits:

Jeep Wrangler JK (2007-2018) Dana 30 and 44 Axles

TeraFlex JK/JKU Heavy-Duty Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels. 

INCLUDES:

• Upper ball joints w/out knurl - pair 
• Lower ball joints w/out knurl - pair

UPPER BALL JOINT FEATURES:

• Extremely hard sintered wear bushings to handle extreme side load demands w/out failure 
• Magnesium Phosphate coating to inhibit corrosion throughout 
• Heat treated 4140 chromoly ball/stud & 1045 carbon steel housing 
• Factory-style serrated flange nut & grease fitting

LOWER BALL JOINT FEATURES:

• Hard alloy tool steel slotted wear plate for ball/stud to socket wear protection 
• Wear plate features grease channels for increased flow through entire joint ensuring longevity & predictable operation 
• Magnesium Phosphate coating to inhibit corrosion & friction throughout 
• Heat treated 4140 chromoly ball/stud 
• Huge 30mm (1.18”) ball 
• Factory style serrated flanged castle nut 
• Ball joint pre-load adjustability provides the end user w/ near effortless wear adjustment (kit includes Preload Adjustment Tool) 
• Low-profile single lip dust seal eliminates torn conventional dust boot concerns 
• Adjustable ball stud retaining ring for accurate initial & future preload adjustments that can be done w/out any axle disassembly 
• Adjustable preload can be performed w/ simple hand tools 
• Adjustable end cap w/ two zerk fittings allow greasing access from either side w/out axle shaft removal even w/ larger RCV shafts 
• Dual helical grease grooves machined in the retaining ring allow spent grease to exit through the low-profile seal 
• Low-profile seal prevents contaminants, while allowing spent grease to evacuate from the ball joint

NOTE: 

• We recommend Ball Joints w/out Knurls (# 3442002 or # 3440000) as they will not score the inner knuckle & open up the bore. 

• We also offer Ball Joint w/ Knurls (# 3442022 or # 3440020) for ball joints that have a loose press fit in the inner knuckle due to repeated ball joint replacement or if knurled ball joints have been installed in the past.

Manufacturer - TeraFlex

TeraFlex is a manufacturer of premium suspension systems, body armor, low-range gearing and high-performance axles for the Jeep Wrangler. TeraFlex have been professionally involved with Jeeps since the 1950s, and their experience allows them to make Jeeps perform their best. Since the beginning, a constant flow of new, unique and innovative products has made our line what it is today. TeraFlex was started in the fall of 1996 to meet the needs of a growing market for heavy duty off-road equipment and suspension enhancements. Since that time TeraFlex has maintained a dominant hold on the Jeep market.

Customers also viewed

HD Ball Joints with Knurl, JK

£373.26inc VAT £311.05ex VAT

HD Ball Joints with Knurl, TJ

£373.26inc VAT £311.05ex VAT

HD Ball Joints w/out Knurl, TJ, XJ, ZJ, YJ

£373.26inc VAT £311.05ex VAT

HD Ball Joints, JL, JT

£349.00inc VAT £290.83ex VAT

Knuckle Ball Joint Kit (HD), JK / WJ

£327.43inc VAT £272.86ex VAT

Knuckle Ball Joint Kit (HD)

£141.47inc VAT £117.89ex VAT

Front Lower Control Arms, Superflex, JK

£542.48inc VAT £452.07ex VAT

HD Tie Rod & Drag Link Kit, JK RHD

£1,118.51inc VAT £932.09ex VAT

Enforcer Complete Control Arm Set, JK

£2,507.67inc VAT £2,089.72ex VAT

Knuckle Ball Joint Kit, JK

£109.75inc VAT £91.46ex VAT

HD Chromoly Tie Rod Kit, JL, JT

£627.54inc VAT £522.95ex VAT

Ultra-Premium Synthetic Grease

£26.50inc VAT £22.08ex VAT