Tera44 Front Replacement Axle Housing TF44 - 4"+ Right Hand Drive (3544203)

Product Description

Fits:

Jeep Wrangler JK (2007-2016) Right Hand Drive With 4"+ Lift Kits.

The TeraFlex Tera44 heavy duty upgrade axle housing (TF44) is the perfect solution for bent, broken or damaged front axles in JK Wrangler vehicles. The Tera44 is an upgrade for Jeep JK owners looking to beef up one of the weak areas of their Jeep. The differential center section is engineered for extreme use and is constructed with increased rib gussets in a ductile cast iron housing. The smooth radius bottom is designed to glide over rocks & obstacles, and incorporates a bottom oil drain hole for simple fluid changes. By integrating the upper control arm mount in the factory location on the housing unnecessary bracketry is eliminated. By increasing the axle tube diameter to the largest in the industry, the 3.25” OD x 0.25” wall DOM tubing make axle bending and breaking a thing of the past and is no longer a concern. Redesigned forged inner knuckles increase section strength to eliminate ball joint separation. The replacement axle housing assembly includes the Tera44 center section, 3.25” OD tubes, 1/4” Thick CNC laser cut axle brackets with integrated lower bracket skid plates, reinforced front trackbar mount (ties into spring pad) for greater strength, and forged inner knuckles. Pre-installed inner seals and upper control arm bushings make the upgrade seamless. A Premium UV protected triple-stage powder coat process provides superior corrosion resistance. The Tera44 retains all JK ESP, ABS & Speedometer sensor capability. The Tera44 is 100% engineered, designed, and hand assembled in the USA with 100% new components. The Tera44 comes with a 1 year unlimited mileage, No Excuses warranty. Includes sensor plug & air line fitting for ARB and Detroit lockers. 

Fits right hand drive JK Wranglers with 4+" of lift, and upgrading to a new axle (not retaining factory axle components).

Will require new axle shafts, carrier and ring and pinion. All steering knuckles and brake components can be swapped from existing Dana 30 or 44 axle. 

Please contact us is you are a Rubicon owner looking for direct replacement for the factory JK Rubicon Dana 44 housing (re-using factory locker & shafts), you will require the Teraflex R44 housing. 

Due to size and weight of product, please contact us to arrange shipping quotations. 

Product Information

Click on a link below to view additional information about this product.

• Further Product Information

Manufacturer - TeraFlex

TeraFlex is a manufacturer of premium suspension systems, body armor, low-range gearing and high-performance axles for the Jeep Wrangler. TeraFlex have been professionally involved with Jeeps since the 1950s, and their experience allows them to make Jeeps perform their best. Since the beginning, a constant flow of new, unique and innovative products has made our line what it is today. TeraFlex was started in the fall of 1996 to meet the needs of a growing market for heavy duty off-road equipment and suspension enhancements. Since that time TeraFlex has maintained a dominant hold on the Jeep market.

Customers also viewed

Tera44 Rubicon Front Replacement Axle Housing R44 - 4"+ Right Hand Drive

£3,383.68inc VAT £2,819.73ex VAT

Rear HD Differential Cover Kit, JL

£233.13inc VAT £194.28ex VAT

Front HD Differential Cover Kit, JL Dana 44

£233.13inc VAT £194.28ex VAT

Axle Tube Seals, Red

£115.03inc VAT £95.86ex VAT

Axle Tube Seals, Black

£115.03inc VAT £95.86ex VAT

HD Chromoly Tie Rod Kit, JL, JT

£627.54inc VAT £522.95ex VAT

Front & Rear SpeedBump Kit, JK (3-3.5" Lift)

£1,018.05inc VAT £848.38ex VAT

HD Ball Joints, JL, JT

£349.00inc VAT £290.83ex VAT

Progressive Bump Stop Kit, Front & Rear,JL 4.5"

£115.50inc VAT £96.25ex VAT

Rear SpeedBump Bump Stop Kit, TJ (4-6" Lift)

£542.93inc VAT £452.44ex VAT

Delta Brake System (Front & Rear) – 5x5”, JL, JT, JK

£2,986.43inc VAT £2,488.69ex VAT

Ultimate Dana 60 Rear Axle, 4.88, ARB, RHD, JK

£7,769.88inc VAT £6,474.90ex VAT