BP-51 High-Performance Shock Absorber Kit, JL (2.5-3.5" Lift) (BP51JLKIT)

Product Description

Fits:

Jeep Wrangler JL (2018+) with 2.5-3.5" of lift

Old Man Emu is pleased to release the latest application of BP-51 High-Performance Bypass Shock Absorbers engineered specifically for the Jeep Wrangler JL. This package consists of two front dampers, two rear dampers, and two fit kits. These BP-51 Shock Absorbers work with the OME springs and fit kits for both the Sport and Rubicon JL models. With this lift, your vehicle will achieve a lift height of 3.5 inches on the Sport and 2.5 inches on the Rubicon.

Design & Development:

The front reservoir placement required a bracket to be developed to mount the reservoir to the chassis rail inside the fender just below the headlight. Special consideration was taken to cater to both the Sport and Rubicon models as the headlight design varies.

The rear reservoir was able to utilize the piggyback mount because sufficient room was available.

To fit BP-51 Shock Absorbers into the front of the Jeep Wrangler JL, the OME engineers had to design and fabricate specific lower shock mounts to prevent contact between the shock absorber body and chassis rail when the shock is fully extended. To provide more space the lower shock mount is relocated outwards.

The rear shock mount has also been relocated to provide clearance between the shock absorber body and the sway bar at full droop. The rear mount not only relocates the bottom mount but also provides a skid and protection for off-road use. Consideration of the mount design included ease of fitment of the shaft guard which protects the shaft against stone damage. 

BP-51 Key Features & Benefits:

• Internal bypass, shim controlled, position-sensitive damping
  
• Provides comfort at ride height
  
• Damping increases as you get closer to the end zone
  
• Increased control at end zones
  
• Kidney bypass ports/51mm bore diameter
  
• Maximum bore size and bypass diameter 
  
• Greater oil volume
  
• Vehicle-specific applications
  
• No fitting modifications required
  
• Fit kits developed specifically for the JL
  
• External compression and rebound adjustment 
  
• Independent adjustment of compression and rebound
  
• Ultra-wide range to suit varying loads and ride preferences
  
• Body/reservoir/components 6061 T6 aluminum construction
  
• Type 3-40 micron hard-anodized finish, Corrosion resistant
  
• Abrasion resistance to stone damage
  
• DASH-6 high-temperature teflon hose with high-flow fittings
  
• No restriction of oil flow
  
• High-pressure nitrogen reservoir with aluminium anodized-floating piston
  
• Increased oil volume
  
• Maximize travelImpact-resistant, replaceable shaft guard protects against stone damage 
  
• Quality oversized rubber bushings
  
• Highly durable Large teflon-lined spherical bearings

Damper Specifications: Part Number: BP5160033 (Front)

• 649mm extended
• 416mm compressed

Part Number: BP5160034 ( Rear L/R)

• 686mm extended
• 428mm compressed 

• Front Shocks PN: BP5160033 x 2
  
• Front Fit Kit PN: VM80010038 
  
• Rear Right Shock PN: BP5160034R 
  
• Rear Left Shock PN: BP5160034L 
  
• Rear Fit Kit: VM80010039 
  

Manufacturer - Old Man Emu

Designed for superior performance across all terrain, an Old Man Emu suspension upgrade by ARB will provide noticeable improvements to a vehicle’s performance, including load carrying capacity and control characteristics.

Australia’s leading 4×4 suspension brand takes into account your individual requirements with specialist engineers spending hundreds of man hours testing and modifying various combinations in the demanding Australian Outback so you can find the most suitable solution for your needs.

ARB and Old Man Emu’s commitment to providing the most comprehensive range on the market has resulted in an extensive selection of quality products. From OME shocks to OME suspension kits, Old Man Emu products are backed by a minimum 3 years or 60,000km (whichever comes first) warranty and aftersales service that is unmatched by any other suspension company.

Customers also viewed

Rear Shock, 5160 Series Reservoir (3.5-4.5" Lift)

£309.95inc VAT £258.29ex VAT

Front Shock, 5160 Series Reservoir (3.5-5" Lift)

£310.22inc VAT £258.52ex VAT

2.5" BP-51 Suspension Lift HD, JL 4 Door

£3,488.79inc VAT £2,907.32ex VAT

2.5" BP-51 Suspension Lift HD, JL 2 Door

£3,488.79inc VAT £2,907.32ex VAT

2.5" BP-51 Suspension Lift, JL 4 Door

£3,488.79inc VAT £2,907.32ex VAT

2.5" BP-51 Suspension Lift, JL 2 Door

£3,488.79inc VAT £2,907.32ex VAT

Front Shock Absorber, BP-51, JK (2-3" Lift)

£603.88inc VAT £503.23ex VAT

Rear Shock Absorber, BP-51, JK (2-3" Lift)

£603.88inc VAT £503.23ex VAT

Front Shock Absorber, BP-51, JK (3.5-4.5" Lift)

£602.70inc VAT £502.25ex VAT

Rear Shock Absorber, BP-51, JK (3.5-4.5" Lift)

£602.70inc VAT £502.25ex VAT

4" Suspension Lift, With BP-51, JK, Petrol

£3,820.58inc VAT £3,183.82ex VAT

OME BP-51 Fitment Kit Front, JK

£143.86inc VAT £119.88ex VAT